Scale: What does the Err1 message on the display mean?

The Err1 error indicates that the scale successfully recorded your body weight but was unable to complete the bioimpedance analysis. This analysis is necessary to calculate additional measurements such as body fat percentage, muscle mass, and other body composition metrics.

Possible causes and solutions

Insufficient foot contact with the electrodes
Ensure your feet are firmly and fully touching all contact points on the scale.

Large foot size
Users with foot size 45 (EU) or larger may have difficulty maintaining even contact. Try adjusting your foot position slightly to improve electrode contact.

Dry or callused skin on the feet
Very dry or thick skin may block the bioimpedance signal. Consider moisturizing or lightly exfoliating the feet if needed.

Wearing socks
The scale requires direct skin contact for bioimpedance analysis. Always use the scale barefoot.

Stepping off the scale too early
Stay on the scale until the full measurement process is complete and additional metrics are displayed.

Dirty or oily surface
Wipe the scale surface with alcohol and make sure it is clean and dry before use.

Possible hardware issue
If the error persists despite following all the steps above, the issue may be hardware-related. You can test the electrodes by placing your palms on them. If the error continues to appear, the problem may be with the platform itself.

If the issue remains after trying these solutions, please contact support for further assistance.