GoBe U: How to Clean and Care for Your Device

Proper maintenance is essential for keeping your GoBe U in good condition and ensuring accurate measurements. Here's how to care for your device:

Casing Care

• Avoid salt and chlorinated water
  Do not wear GoBe U in the sea or swimming pools — salt and chlorine can damage the casing.

• Dry after contact with water
  If the casing gets wet, gently wipe it dry with a microfiber cloth. If you don’t have one, use any soft, non-abrasive material that won’t scratch the surface.

• Avoid extreme temperatures
  Do not expose GoBe U to temperatures below -10°C or above 40°C.

Sensor Cleaning

Cleaning the sensor regularly helps maintain proper contact with your skin and accurate readings.

We recommend cleaning the sensor several times per week — especially after workouts or heavy sweating.

To clean the sensor:

1. Apply a small amount of liquid soap or dishwashing liquid (surfactant-based) to the sensor.

2. Rub gently using a cotton swab or your fingers.

3. Rinse with water.

4. Wipe dry with a soft cloth or paper tissue.

When to Clean Your Device

• After intense physical activity or sweating

• If you notice frequent loss of contact between the sensor and your skin

• As a routine, we recommend cleaning 1–2 times a week

Charging Cable Care

Do not wash the charging cable under running water — it is not waterproof.